This very Detailed guide for installing a fresh /Clean version of OS X El Capitan 10.11 With Chameleon Bootloader using fully Vanilla Installation Method. It requires no experience and all basic installation steps are mentioned in this Guide. Chameleon is most popular booloader yet and very handy and easy to handle on Legacy System. But in Latest release of OSX it becomes very difficult for eveyone to use it.

We will provide you each and every steps gonna make this guide very Easy and Clean for Every Age of Hackintosh User Especially NewComer's / Noob/NewBie. 0R Requirement: 1.At least 8 GB USB Drive 2. Mac OS X Application 3.

Alright, many people got problems creating a chameleon USB boot drive for their OS X installation. I've tested a simple Chameleon R2588 version USB boot drive to work with OS X: Yosemite, Mavericks and Mountain Lion. I tested the boot with 3 OS Xs and 3 laptops: Sandy Bridge (2nd generation.

Latest revision of Bootloader Enoch Chameleon Bootloader 4. Essential Kext Now this guide starts:: Making or Preparing for USB installer Step 1: Open Disk Utility and select either your USB drive, on the right side select the Partition tab and click the Current layout and change it to 1 partition then click the Options button at the bottom and select GUID Partition Table, name it whatever you want (in the example I named mine as Untitled) and format it as Mac OS Extended (Journaled) Step 2: OSX El Capitan app in your Application folder, or Wherever you have it Step 3: Now open Terminal and Copy & Paste it in Terminal.

Killall Finder This Command will Unhide /Enable Hidden files to view and you are able to do following workaround. Note: for Hiding Files again use NO instead of Yes Keyword in above command for Terminal. Step 3: Then open folder in the following order open “Contents”, open “SharedSupport”, open “InstallESD” / “InstallESD.dmg” Note: after opening InstallESD it will be mounted but there are some files hidden (“BaseSystem.dmg”, “AppleDiagnostics.dmg” and “BaseSystem.chunklist”, “AppleDiagnostics.chunklist” ), these files are need to be copy and pasted after restoring complete from “Install ESD” to USB drive. Step 3: open the file BaseSystem.dmg, when the finder window popup close it. Step 4: open Disk Utility and select the volume of the USB drive select Restore from menu on right of Disk Utility, drag and drop “OS X Base System” to Source drag and drop USB Drive volume to Destination. Click restore and it will take couple of minutes to finish the operation see following Screenshot: Note::The pendrive volume name will be replace as “OS X Base System”, you can rename it if you want. Step 5: Open your USB navigate to “System” –>“Installation” and delete the file Packages symnlink file and then copy the folder “Packages” from the volume “OS X Install ESD” and replace it to your pendrive “System” –>“Installation” paste it in there Step 6: Now copy “BaseSystem.dmg”, “AppleDiagnostics.dmg” and “BaseSystem.chunklist”, “AppleDiagnostics.chunklist” from “Install ESD” to USB drive.

Step 6: Installing Chameleon Bootloader Step 7: Now its time to add all the Essential to Extra/Extensions/ Folder. Essential Kexts: FakeSMC and NullCPUPowerManagement These are most essentail kext for EverySystem NullCPUPowerManagemen: if your PowerManagement is Working then its not required and Use your SSDT still strongly recommend to use it for First installation or USB Installation only.

Step 6: Now you have to Configure your org.Chameleon.boot.plist file and Kernel.plist with Xcode or PlistEditor Pro or Else you like to Edit Plist files. Kernel.plist =>/Extra/ kernel.plist and add option KernelBooter_Kext = Yes, you can do this just select a option when installing Enoch Bootloader like following ScreenShot: Org.Chameleon.boot.plist =>/Extra/org.Chameleon.boot.plist and Add option.

CsrActiveConfig (Hex 0x00) (Binary 00000000) in Decimal is 0 CsrActiveConfig (Hex 0x03) (Binary 00000011) in Decimal is 3 CsrActiveConfig (Hex 0x65) (Binary 01100101) in Decimal is 101 CsrActiveConfig (Hex 0x67) (Binary 01100111) in Decimal is 103 Note: Before Installing Custom kext or applying Kext patches you are required to Disable SIP, Now your Installer is Almost Ready, just to boot with it. But if you have HDD with MBR Partition and Kernel (Kernel not Found ) related issue then you have to Apply Additional Workaround.

Additional Workaround (Optional Steps ) MBR Partition Map Patch for EL Capitan Mac OS X this patch is only required if your HDD is Formatted using MBR Partition Scheme instead GUID ( which is Natively Supported by Ma c OS X ) just you have to replace these files with system files thats it. 1.Download MBR Patch Files from Here 2.Extract zip files and Copy OSInstall.mpkg USB->System->Installation->Packages->OSInstall.mpkg Replace it with existing file.

3.Now again Copy the OSInstaller and Goto USB->System->Library->PrivateFrameworks->OSInstaller.framework->Versions->A->OSInstaller and Again Replace it with Now Done. Its Capable of Running on MBR Formatted HDD. Extracting OS X El Capitan Kernel First Download and install it. Now Open Packages Folder Look for Essential.pkg Open it with Pacifist and Now Goto ->System ->Library ->Kernels ->Kernel and Extract it then copy it to USB Drive (OSX BaseSystem ) Install OS X El Capitan Recommended BIOS Settings: Motherboard with Legacy BIOS set your BIOS to Optimized Defaults, and your hard drive to AHCI mode. To access BIOS Setup, press and hold Delete on a USB Keyboard while the system is booting up 2. Load Optimized Defaults 3. If your CPU supports VT-d, disable it 4. Set HPET to 64-bit mode.

Save and exit. Step 1: Install OS X El Capitan You’re almost done! All you need to do is boot from the USB drive and install! For best results, insert the USB is in a USB 2.0 port. Turn on the computer 2. Press the hotkey to choose boot device (usually F12, F10, or F8) 3. Choose USB 4.

At Chameleon boot screen, choose Boot Install OS X from USB ( Install OS X El Capitan ). For a new installation of OS X, you MUST erase and format the destination drive according to the following steps before continuing. Select and open Install OSX,Then you arrive at the Installer, choose language.

7. When the installer asks you where to install, choose El Capitan, or your existing install. Upon completion, the system will automatically restart. Note: system drive isn’t bootable yet. Boot from the USB and Select your drive to Boot Post-Installation with Chameleon Bootloader The installation is complete, but the system drive isn’t bootable yet. Boot from the USB again, this time choosing El Capitan.

We will make it Bootable. 1.Download or Use Already Downloaded Enoch Installer Hurray!! You have Successfully it and Now you can Install Specified System Kexts like Audio, Ethernet, Video or else. For Installation of Kext you can Use For All-in-One Post-Installation Tool Use Note: Before Installing Custom kext or applying Kext patches you are required to Disable SIP, Now you have to Configure your org.Chameleon.boot.plist file and Kernel.plist with Xcode or PlistEditor Pro or Else you like to Edit Plist files. Kernel.plist =>/Extra/ kernel.plist and add option KernelBooter_Kext = Yes, you can do this just select a option when installing Enoch Bootloader like following ScreenShot: Org.Chameleon.boot.plist =>/ Extra/org.Chameleon.boot.plist and Add option. Hello Deepak, I installed according to the instructions that you describe.

The installation was completed successfully, but can not be explicitly loaded OS. Ejects error and freezes with the following message: System uptime in nanoseconds 770025751 How to solve this problem? My specification is as follows: Mobo: Asus P8H61 / USB3 GPU: NVIDIA GeForce GTX 650 1023 MB CPU: 3.4GHz Intel Core i3 Memory: 8GB DDR3.

Question: What method should I choose for this computer? Dil Chura Liya Saathiya Saaya Movie Mp3 Download. Clover (UEFI method or Legacy method) or Chameleon?

Thanks in advance Kosanovic. Hi, I’m a noob, I really would like to install this on my PC: Specs: ————————————————————————– mainboard: MSI H61M-P31 mainboard graphics: NVIDIA processor: Intel Core i5-3470 CPU @ 3.20GHz 4-core memory(RAM): 8.00GB DDR3 system: 64-bit operating system, x64 based processor ——————————————————————————- I followed all the steps to create a bootable USB, I inserted the USB into the computer, turned it on, held F12 then I pressed enter on OS X El Capitan it looked like it was working for a while then it had lots of kernel errors. It stopped on: System uptime in nanoseconds: then a number.

It never went past there. Here is a video that shows the errors on Youtube. I have a problem installing both boot loaders. Enoch doesn’t boot up after installing.

Clover boots up but, I ended up with 4 Split screens. Or 4 mini desktops. Have no clue why? Did not even touch video or display options. Asus K53E Laptop, iCore 3 Sandy Bridge, HM65 chipset, installed on external SSD drive on USB port, Windows 10 internal.

I’m new to this so I’m dangerous, have had many kernel panics, recoverable and unrecoverable. Reinstalled about 20 times so far. How do I pick the correct selections? Hi, thank you, I have a lot of questions regarding post install. Bootloader Enoch worked but I had put a kext in that caused panic.

Had to reinstall. Then, afterwards I was able to finally install Clover through your MacPoison.

That’s when the screen ended up with 4 desktops. I then reinstalled OS because screens are too small to read. Didn’t know what caused the problem. 2 Bootloader MacPoison was cool but clover caused the screen splitting into 4 desktops. Otherwise it was nice. Don’t know why. Want to get this stable.